24 micron Metalized Pet Thermal Lamination Film for Packing
Characteristics
1. Light weight, clean, thin, good flexibility and cushioning;
2. Invariable if it is attacked repeatedly;
3. Low thermal conductivity and superior heat insulation, reflective 95%;
4. Outstanding safety and enviromentally friendly;
5. Easy to install, high efficiency, Water proof,
6. Cost effective and versatile; Maintenance free.
Application
1. Lamination with other materials like bubble, EPE Foam, XPE foam woven fabric and so on for building reflective insulation.
2. Wrapping :Machine packaging, Food packaging
3. First-aid
4. Industrial sheds and Agriculture.
Data sheet:
Metallized PET film + PE (Material requirements)
Packaging Details:
1.bubble film, to protect from collision during transportation
2.specified label, factory label or customized label without factory information
3.different types of packing ways according to roll size or customer's request
4.wooden pallet with or without fumigation
1. What is your MOQ?
Normally our MOQ for each size is 1ton. If you think it is too much, we can discuss according to your requirement in details.
2. Can you offer free sample?
Yes, A4 sample for free.
3. What is your delivery time?
We deliver in 10-20days
4. What is your payment?
TT or LC at sight.
5. Can you accept mixed products in one container?
Yes, we accept for sure.
Characteristics
1. Light weight, clean, thin, good flexibility and cushioning;
2. Invariable if it is attacked repeatedly;
3. Low thermal conductivity and superior heat insulation, reflective 95%;
4. Outstanding safety and enviromentally friendly;
5. Easy to install, high efficiency, Water proof,
6. Cost effective and versatile; Maintenance free.
Application
1. Lamination with other materials like bubble, EPE Foam, XPE foam woven fabric and so on for building reflective insulation.
2. Wrapping :Machine packaging, Food packaging
3. First-aid
4. Industrial sheds and Agriculture.
Data sheet:
| Thickness | OD | Width | Length | Diameter | Inner Core |
| 12-50mic | 2.0-2.5 | ≤2350mm | 3000-36000m/r | ≤800mm | 76mm(3″),152mm(6″) |
| Type of material | Multilayeredcoatedfilm | ||
| Short name | Metallized PET film + PE | ||
| Metallization | Inside | ||
| Thickness | The nominal thickness is determined by the total thickness of the materials: (8-12 mic) Metallized PET film + (7-25 mic) PE. The total thickness of the material: ≤ 35 mic | ||
| Finalproduct | Roll | ||
| Reel | Heat-sealing layer (PE) inside | ||
| Materialwidth | 600 - 1500 mm | ||
| NET weight | (Min) | 55 kg | |
| (Max) | 70 kg | ||
| WidthTolerance | -2 mm / +2mm | ||
| Lateral Edges Alignment | -2 mm / +2mm | ||
| Thickness Tolerance | 6% | ||
| Splice | unit/roll | ≤ 1 | |
| type | Metallized PET / BOPET / Transparent OPP tape Scotch width ≥ 40 mm | ||
| Splicemarking | not necessary | ||
| ID | ID material | paper | |
| Internal diameter | 76 mm (3 inches) | ||
| ID material thickness | 12 ÷ 15 mm | ||
| ID width | Material width (0+5) mm | ||
1.bubble film, to protect from collision during transportation
2.specified label, factory label or customized label without factory information
3.different types of packing ways according to roll size or customer's request
4.wooden pallet with or without fumigation
1. What is your MOQ?
Normally our MOQ for each size is 1ton. If you think it is too much, we can discuss according to your requirement in details.
2. Can you offer free sample?
Yes, A4 sample for free.
3. What is your delivery time?
We deliver in 10-20days
4. What is your payment?
TT or LC at sight.
5. Can you accept mixed products in one container?
Yes, we accept for sure.