Plastic Sheet Extruder Polycarbonate Sheet Hollow Sheet Extruder

polycarbonate hollow sheet making machine factory PART 1 INTRODUCTION:This  pc hollow cross section sheet/plate extrusion line machine consists of single screw extruder, melt-pump, hydraulic filter exchanging unit, hollowsheet die head, vacuum calibrating table, first haul off machine, oven, corona treating u

Featured Products

polycarbonate hollow sheet making machine factory 

PART 1 INTRODUCTION:
This  pc hollow cross section sheet/plate extrusion line machine consists of single screw extruder, melt-pump, hydraulic filter exchanging unit, hollowsheet die head, vacuum calibrating table, first haul off machine, oven, corona treating unit, cooling table, second haul off machine, trimming and length-settled cutting units and stacker etc.


PART 2 CHRACTERISTICS OF VACUUM CALIBRATOR
1. High quality mould steel or high strength Al-Mg Alloy
2. Special harden treatment and non-sticky coating on the surface.
3. Independently controlled vacuumize device and temperature controlling system.
4. Consist of vacuum sealing edge device.

The technology of hollow sheet die with co-extrusion feed block to get UV+PC+UV, UV+PC hollow sheet can save 30% UV on the surface.

PART 3 APPLICATION
PC hollow sheet is widely used in construction sunroof in buildings/halls/shopping center/stadium/public places of entertainment and public facility; Ring shield of bus station/garages/pergolas/corridors; Noise barriers for highways and urban elevated road
Plastic Sheet Extruder Polycarbonate Sheet Hollow Sheet Extruder Machine



PART 4 MAIN TECHNICAL DATA
PC Hollow Sheet Extrusion Line Technical Data
Extruder modelSJ-120, SJ-65
Sheet width2100mm
Sheet thickness4-10mm
Max capacity450kg/h
Main motor power132kw
  
THIS LINE CONSISTS OF  
1. vacuum feeding machine 1 set
2.SJ-120/35 single screw extruder 1 set 
3. Hydraulic exchanging units1 set 
4. melting pump  1 set
5. SJ-45/30 single screw extruder for UV1 set 
6. melting pump 1 set 
7. co-extrusion die head  1 set 
8. vacuum calibrating moulds1 set
9. cooling frame and edge cutting units 1 set 
10. 12 rollers  haul off machine 1 set
11. 3000mm length oven 1 set
12. film coating machine 1 set
13. 6 rollers haul off machine1 set
14. cutting machine 1 set 
15. sheet stacker  1 set 


PART 5 DELIVERY, PAYMENT AND OTHERS SERVICES
1.   delivery time: 80 days after receiving the deposit
2.   payment terms:30% for the prepayment by T/T and 70% for the downpayment by T/T before delivery or irrevocable L/C at sight can be available, too.
3.   Guaranteed time: 18 months for the machenical parts and 12 months for the electrical parts.
4.   Service: we will send engineers to customers' factory to help them install, test the machine. 
5.  Contact: Ms Lilly Zhou, : mob: 0086-15266238607

PART 6 COMPANY INFORMATION AND MAIN PRODUCTS:

Plastic Sheet Extruder Polycarbonate Sheet Hollow Sheet Extruder Machine
Plastic Sheet Extruder Polycarbonate Sheet Hollow Sheet Extruder Machine

PART 7 COMPANY CERTIFICATIONS:
Plastic Sheet Extruder Polycarbonate Sheet Hollow Sheet Extruder Machine
PART 8 MACHINE PACKING AND DELIVERY 
All the machine parts will be packed in wooden cases or pellets with stretching films on machine body.

Plastic Sheet Extruder Polycarbonate Sheet Hollow Sheet Extruder Machine

PART 9 COMPANY OVERSEA SHOWS
Plastic Sheet Extruder Polycarbonate Sheet Hollow Sheet Extruder Machine

PART 10 OTHER KINDS OF PLASTIC SHEETS/PLATES EXTRUSION LINE RECOMMENDATION :

1. PET sheet extrusion machine:
Processing material: PET virgin pellets(APET or PETG) plus flakes; Or 100% flakes
Thicknes range: 0.2-1.5mm
Net sheet width: 650mm-1500mm(or as per cusotmer's requirement)
Layer structure: Signle layer or multi-layer
Capacity: 150-650kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
 
2. PP/PS sheet extrusion machine:
Processing material: PP/PS virgin pellets plus recycle material;
Thickness range: 0.15-2mm
Net sheet width: 650mm-720mm-1000mm-1300mm-1500mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-1000kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
 
3. ABS/HIPS sheet extrusion machine:
Processong material: ABS/HIPS virgin pellets plus recycle material
Thickness range: 1-6mm
Net Sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 300-800kg/h
Application: Vacuum forming, thermoforming, refrigerator inner layer, suitcase, etc.
 
4. ABS/PMMA sheet extrusion machine:
Processing material: ABS/PMMA virgin pellets plus recycle material
Thickness range: 1-8mm
Net sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity:300-800kg/h
Application: Vacuum forming, bathtube, etc.
 
5. PE sheet extrusion machine:
Processing material: HDPE/LDPE/LLDPE virgin pellets plus recycle material
Thickness range: 1-2.5mm, 3-35mm
Net sheet width: 1200mm-1600mm-1800mm-2500mm-3000mm-40000mm-6000mm-8000mm
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-1200kg/h
Application: Packaging, construction, water-proof, water-drainage, Geomembrane film, etc.
 
6. PC/GPPS/PMMA sheet extrusion machine:
Processing material: PC/GPPS/PMMA virgin pellets plus recycle material
Thickness range: 1-12mm
Net sheet witdh: 600mm-1220mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 200-600kg/h
Application: Ads., decoration, roofing, etc.
 
7. PC/PP/PE hollow profile sheet/ sunshine roofing panel machine:
Processing material: PC/PP/PE virgin material plus recycle material
Thickness range: 2mm-4mm-6mm-8mm-10mm-12mm
Net sheet width: 1220mm-2100mm
Layer structure: Single layer or multi-layer
Capacity:200-600kg/h
Application: Ads. Decoration, roofing, packaging, printing, etc.
 
8. PVC sheet/edge banding sheet/marble sheet machine:
Processing material: PVC power plus other additive
Thickness range: 0.15-1mm; 1-3mm; 3-12mm
Net sheet width: 650mm-2000mm-3000mm( or as per customer's requirements)
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-500kg/h
Application: Thermoforming, stationery, printing, payment card, SIM card, construction, etc.
 
9. PVC free foam/celuka foam board extrusion line
board width: 1220mm, thickness: 1-10mm, 3-25mm
board application: decoration board, advertising boards, exhibition boards
extruder model: SJ-80/156 conical twin screw extruder
max capacity: 350kg/h
certifications: CE, ISO9001-2008
 
10. EVA car interior decoration sheet extrusion line
Processing material: EVA and other additives
Thickness range: 1-8mm
Width range: 1000-1800mm
Layer  strcuture: single layer
Capacity: 700-800kg/h
Application: automotive sealing strips, sound insulation cushion, sound absorption sheets,
automobile tail box, fenders, car interior and exterior decoration parts etc.
 
11. PVC+PMMA Glazed roofing tiles/corrugated sheet extrusion machine 
Processing material: PVC, PMMA and other additives
Thickness range: 1-8mm
Width range: 720mm, 880mm, 1040mm
Layer structure: A/B, A/B/A, A/B/C
Capacity: 400kg/h
Application: garden-style factory, tourist scenic spots, pavillions, hotels, family building etc.
 
 
Best regards!
Sincerely yours,
Lilly Zhou, Sales Manager
  
Qingdao Leader Machinery Co.,Ltd
Address: South of Yangjialin, Beiguan, Jiaozhou, Qingdao, China
Postal No.: 266300
Tel/fax: 0086-532-86620998, 86622373, 82278979
Website: http://extruder-cn.en.made-in-china.com 
Mob 0086-152 6623 8607
 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours