Water-soluble film wrapped synthetic macromolecular polypropylene fiber and easy to mix

  Water-soluble Film Wrapped Synthetic Macro Polypropylene Fiber(SAP 47S /55S/65S)Description    Macro synthetic fiber is made of Polypropylene. It is used as an alternate to steel fibers and welded wire mesh for precast concrete and shotcrete reinforcement applications.Specification for Fiber Reinforced Conc

Featured Products

  Water-soluble Film Wrapped Synthetic Macro Polypropylene Fiber

(SAP 47S /55S/65S)
Description
    Macro synthetic fiber is made of Polypropylene. It is used as an alternate to steel fibers and welded wire mesh for precast concrete and shotcrete reinforcement applications.
Specification for Fiber Reinforced Concrete and Shotcrete, and are specifically used to improve impact, shatter and abrasion resistance, to increase fatigue resistance,to increase toughness of concrete and provide long term durability of concrete and cement based building products.
Application
  • Shotcrete
  • Channel and tunnel lining
  • Mining
  • Precast concrete
  • Structural rehabilitation
Benefits
  • Provides three-dimensional reinforcement against micro and macro-cracking.
  • Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
  • Cost saving,Is easier to use,to disperse and safe to handle ,reduce equipment wear, fiber rebound and increases build-up thickness compared with steel fibers for shotcrete applications
  • Can be used in highly corrosive circumstance.
  • The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,and also boosts shrinkage resistance and crack resistance.
Technical Information
Minimum Tensile Strength>650 MPa
Modulus >10 GPa
Fibre dimensionL: 47mm / 55mm / 65mm;T:0.55-0.60mm;
W:1.30-1.40mm
Equivalent diameter:0.8mm
Melt Point170ºC
Density0.91g/cm3                                             
Melt flow3.5
Acid&Alkali ResistanceExcellent
Moisture Content≤0%
Appearance White, Transparent, Black, Embossed

Guidelines for use
Dosage is dependent on the application and should be 1.8 to 9kg/ m3 (3 to 15lbs/yd3).
The fibres are wrapped with water-soluble film and uniquely packaged in paper boxes.Then just throw the whole boxes of fibres into the concrete mixture, the boxes and film then dissolve within seconds, leaving the fibres to disperse evenly throughout the mixture.

Packing
5kg/box,1200kg/pallet,12000kg/20'container,24000kg/40'container, can be customized as required.

How to manufacture fiber and used in Floor anti-crack
Water-Soluble Film Wrapped Synthetic Macro Polypropylene Fiber Mixing Easily Fibre

Water-Soluble Film Wrapped Synthetic Macro Polypropylene Fiber Mixing Easily Fibre
Water-Soluble Film Wrapped Synthetic Macro Polypropylene Fiber Mixing Easily Fibre
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours